Fuel Injector OEM 23250-34030
  • Fuel Injector OEM 23250-34030Fuel Injector OEM 23250-34030

Fuel Injector OEM 23250-34030

BAIXINDE BRAND Fuel Injector with the various oems. for example the fuel injector OEM 23250-34030 and other fuel injectors….Fuel Injector OEM 23250-34030 Fits Toyota Aygo Citroen C1 Peugeot 107

Send Inquiry

Product Description

Engine-specific adjustments for reduced emissions and less fuel consumption        


BAIXINDE fuel injectors feature excellent tightness that is measured by means of a special high-precision measurement technology developed by BAIXINDE. Leakage values reduced by factor 10 compared with the former industry-specific threshold are specified.


BAIXINDE fuel injectors can be used all over the world as the material is also resistant against impure and aggressive fuel with a high portion of ethanol and methanol.Fuel injectors are nozzles that deliver a high-pressure spray of fuel that mixes with air on the intake stroke of your engine's pistons. A failed injector can cause a regular misfire, rough idle, poor fuel economy, roughness or loss of power (and will register a trouble code that will illuminate the Check Engine light). If you've pinned down a drivability problem to a failed.Therefore which u choose a good fuel injector is very important.


BAIXINDE BRAND Fuel Injector with the various oems. for example the fuel injector OEM 23250-34030 and other fuel injectors….Fuel Injector OEM 23250-34030 Fits Toyota Aygo Citroen C1 Peugeot 107

Item Details:

Item Condition:



GB Remanufacturing

Interchange Part Number:


Manufacturer Part Number:


Number of Pieces:




Other Part Number:


Country/Region of Manufacture:

United States



Core Charge:


About This Product:

Product Identifiers

1. BrandGB Remanufacturing

2. Manufacturer Part Number842-12156

3. eBay Product ID (ePID)79351520

Product Key Features

California Prop 65 WarningCancer and Reproductive Harm

Additional Product Features

Notes Description:Reman Multi Port Fuel Injector, Package Length--3.25 IN, Package Weight--0.245 LBS, Package Width--1.75 IN, Package Height--1.25 IN

Sub Type:Fuel Injector

Part Type:Fuel Injection System and Related Components

Test Steps:

1. Electrical test: measure ohm's (dead injectors rejected)

2. Ultra-sonic bath: break up and dissolve debris.

3. Flushed in/out: remove debris inside.

4. Flow/Pattern tested in both static and dynamic modes.

5. Apply a thin coat of crystal clear enamel. 

6. Assemble with new Filter, O-rings and pintle cap.


Good factor : Reduced leakage values compared with industry-specific thresholds

Flexible : Engine-specific installation andspray characteristics

Versatile : Ethanol resistance allows worldwide use

Low weight : Usually  the  weight  is  about  50g-200g….

Inside a fuel injector

When the injector is energized, an electromagnetmoves a plunger that opens the valve, allowing the pressurized fuel to squirt out through a tiny nozzle. The nozzle is designed to atomize the fuel -- to make as fine a mist as possible so that it can burn easily.The amount of fuel supplied to the engine is determined by the amount of time the fuel injector stays open. This is called the pulse width, and it is controlled by the ECU.The injectors are mounted in the intake manifold so that they spray fuel directly at the intake valves. A pipe called the fuel rail supplies pressurized fuel to all of the injectors.In order to provide the right amount of fuel, the engine control unit is equipped with a whole lot of sensors. Let's take a look at some of them.

Hot Tags: Fuel Injector OEM 23250-34030, China, Manufacturers, Suppliers, Factory, Made in China, Wholesale, In Stock, Discount